Working...

Your Cart

  • Your cart is empty

Back


WWW.REDOAKGUNSMITHING.COM

989-733-7010 

Redoak375@GMAIL.COM

IF YOU WOULD LIKE TO SHIP A FIREARM IN FOR REPAIR OR TO BE RETURNED AFTER REPAIR PLEASE EMAIL OR CALL

CUSTOM BARREL INSTALLATION AND BARREL THREADING

  • INSTALL PRE-THREADED BARREL                                   $80-220.00
  • CUSTOM BARREL INSTALLATION                                     $220.00
  • CUT & CROWN 11 DEG., TARGET, HUNTER                    $95.00
  • INSTALL MUZZLE BRAKE (INCLUDES RED OAK
  • GUNSMITHING BRAKE)                                                       $189.00
  • CUT & CROWN SHOTGUN EACH BARREL
  • (INCLUDES RE-INSTALLATION OF BEAD)                         $95.00

We thread for almost all brands of bolt action rifles including but not limited to Ruger, Savage, Remington, Tikka, Beretta, Mossberg, Marlin, Thompson Center, Winchester and Browning. Our brakes have a seamless blended style. No crush washers and they are removable.  We pride ourselves on having a classic look to our muzzlebrakes = streamline seamless fit, because not every muzzle device needs to be large and gaudy.  However the are just as effective. If you don't like recoil then have us install a muzzle brake and tame some of that recoil.

RIFLE ACCURIZING

  • LAP BOLT LUGS                                                                  $60.00 *** IF RE-HEAD SPACING IS REQUIRED  $100.00
  • TRUE RECEIVER FACE                                                      $60.00
  • TRUE BOLT FACE                                                               $60.00
  • GLASS BED ACTION                                                           $70.00
  • GLASS BED RECOIL LUG ONLY                                       $40.00 
  • FREE FLOAT BARREL                                                        $45.00
  • PILLAR BEDDING INCLUDING FREE
  • FLOAT BARREL                                                                  $120.00
  • LAP SCOPE RINGS                                                            $40-60.00
  • TRIGGER JOBS BOLT ACTION                                         $65.00  
  • SIGHT IN 0-100 YARDS                                                     $35.00 PLUS AMMO (factory ammo only)
  • ACCURACY CHECK                                                           $85.00 PLUS AMMO (factory ammo only)

 

REBLUING & METAL FINISHING

  • BOLT ACTION                                                                         $180.00
  • SINGLE BARREL SHOTGUN                                               $160.00
  • PUMP OR AUTO SHOTGUN W/O RIB                             $240.00
  • A-5 OR MODEL 12 STYLE                                                    $260.00
  • PISTOL                                                                                     $180.00
  • REVOLVER                                                                                $260.00
  • LEVER ACTIONS                                                                     $280.00
  • HARD SOLDERED O/U OR SXS                                         $280.00
  • CASE COLOR RECEIVERS                                                     $375.00
  • CASE COLOR SMALL PARTS                                                 $120.00
  • RUST BLUE O/U OR SXS BARRELS ONLY                        $245.00
  • PUMP OR SEMI AUTO RIFLE                                                 $240.00
  • RUGER NO.1 OR BROWNING 185 STYLE                         $280.00
  • OCTAGON BARRELS ADDITIONAL                                      $80.00

**FINISH TYPE MAY DEPEND ON SEVERITY OF RUST,PITTING, SCRATCHES OR DINGS.**

 

GENERAL REPAIRS OR INSTALLATIONS

  • SCOPE MOUNT AND BORE SIGHT                                           $30.00
  • SIGHT IN + AMMO                                                                          $35.00
  • BORE SIGHT ONLY                                                                        $5.00
  • INSTALL MID OR FRONT BEAD                                                 $20.00
  • INSTALL SLING SWIVELS                                                            $35.00
  • DRILL & TAP (INCLUDES MOUNT AND BORE SIGHT)        $80.00
  • INSTALL NEW SIGHTS ALREADY DRILLED AND TAPPED $15.00
  • CUT DOVETAIL                                                                                $45.00
  • DRILL AND TAP PER HOLE $20.00 / PLUS SET UP COST OF   $20.00
  • BLACK POWDER SIGHT IN + COMPONENTS                         $85.00

**ALL PRICES ARE FOR LABOR AND DO NOT INCLUDE THE COST OF PARTS OR AMMUNITION**

 

CLEAN & OIL

  • BOLT ACTION RIFLES                                            $65.00
  • SEMI-AUTO OR PUMP RIFLES                                 $85.00
  • LEVER ACTION RIFLES                                          $85.00
  • SINGLE SHOT RIFLE OR SHOTGUN                     $65.00
  • A-5 OR MODEL 12 STYLES                                    $85.00
  • SEMI-AUTO OR PUMP SHOTGUNS                       $85.00
  • O/U OR SXS SHOTGUN                                          $95.00
  • MUZZLELOADING RIFLES UNLOADED              $35.00-$65.00
  • HANDGUNS                                                           $35.00-$65.00

ALL OTHER GUNSMITHING SERVICES

  • HOURLY SHOP RATE IS $65.00
  • MINIMUM $35.00
  • FIREARM APPRAISAL FEE $35.00 EACH

**Clean and oil includes inspection of parts. If broken or worn parts are found. The customer will be notified. Replacement or repair of parts may require additional charges**.

STOCK WORK

  • SATIN OIL FINISH                                                                      $160.00
  • INSTALL RECOIL PAD + PAD COST                                         $45.00
  • CUT STOCK AND INSTALL PAD + PAD COST                          $65.00
  • STOCK FITTING AND INLETTING (WOOD OR SYNTHETIC)  P.OR.
  • CHECKERING $25.00 PER HOUR MIN $225.00

SHIPPING FOR REPAIR

**ALL FIREARMS MUST BE UNLOADED AND AMMO SHIPPED SEPERATE**

Simply box your firearm up with your current address and shipping info include your phone number and email address. If you can a photo copy of you drivers license in the box is all ways the best way to go. A brief discription of the work you need done. Once we receive your firearm one of our representatives will contact you that we have received it and go through a more detailed discription of the work you would like completed. If you need shipping materials and don't have any we can provide them for additional cost and a return shipping label just email Drew at redoak375@gmail.com for more info and payment options for shipping.

Return shipping cost will be added on to all repairs at the completion of the repair.

If you have any questions about how to ship or what type of boxes are appropriate let us know and we will help you with this process.

You may not ship loaded firearms to us or ammo in the same container as the firearm.

After completion of the repair we will contact you for payment and then ship the firearm back to you.

Ship to:

Red Oak Gunsmithing & Outfitters

20508 State St.

Onaway, MI 49765

REPAIR/SERVICE

FFL Transfer Fees $20.00 for up to three long guns. $20.00 each additional long gun. $30.00 for one handgun / $15.00 each for additional handguns up to four. More than four please contact Drew at redoak375@gmail.com

Return to Hughes Precision https://hughesprecision.com/

WWW.REDOAKGUNSMITHING.COM

989-733-7010 

Redoak375@GMAIL.COM

IF YOU WOULD LIKE TO SHIP A FIREARM IN FOR REPAIR OR TO BE RETURNED AFTER REPAIR PLEASE EMAIL OR CALL

CUSTOM BARREL INSTALLATION AND BARREL THREADING

  • INSTALL PRE-THREADED BARREL                                   $80-220.00
  • CUSTOM BARREL INSTALLATION                                     $220.00
  • CUT & CROWN 11 DEG., TARGET, HUNTER                    $95.00
  • INSTALL MUZZLE BRAKE (INCLUDES RED OAK
  • GUNSMITHING BRAKE)                                                       $189.00
  • CUT & CROWN SHOTGUN EACH BARREL
  • (INCLUDES RE-INSTALLATION OF BEAD)                         $95.00

We thread for almost all brands of bolt action rifles including but not limited to Ruger, Savage, Remington, Tikka, Beretta, Mossberg, Marlin, Thompson Center, Winchester and Browning. Our brakes have a seamless blended style. No crush washers and they are removable.  We pride ourselves on having a classic look to our muzzlebrakes = streamline seamless fit, because not every muzzle device needs to be large and gaudy.  However the are just as effective. If you don't like recoil then have us install a muzzle brake and tame some of that recoil.

RIFLE ACCURIZING

  • LAP BOLT LUGS                                                                  $60.00 *** IF RE-HEAD SPACING IS REQUIRED  $100.00
  • TRUE RECEIVER FACE                                                      $60.00
  • TRUE BOLT FACE                                                               $60.00
  • GLASS BED ACTION                                                           $70.00
  • GLASS BED RECOIL LUG ONLY                                       $40.00 
  • FREE FLOAT BARREL                                                        $45.00
  • PILLAR BEDDING INCLUDING FREE
  • FLOAT BARREL                                                                  $120.00
  • LAP SCOPE RINGS                                                            $40-60.00
  • TRIGGER JOBS BOLT ACTION                                         $65.00  
  • SIGHT IN 0-100 YARDS                                                     $35.00 PLUS AMMO (factory ammo only)
  • ACCURACY CHECK                                                           $85.00 PLUS AMMO (factory ammo only)

 

REBLUING & METAL FINISHING

  • BOLT ACTION                                                                         $180.00
  • SINGLE BARREL SHOTGUN                                               $160.00
  • PUMP OR AUTO SHOTGUN W/O RIB                             $240.00
  • A-5 OR MODEL 12 STYLE                                                    $260.00
  • PISTOL                                                                                     $180.00
  • REVOLVER                                                                                $260.00
  • LEVER ACTIONS                                                                     $280.00
  • HARD SOLDERED O/U OR SXS                                         $280.00
  • CASE COLOR RECEIVERS                                                     $375.00
  • CASE COLOR SMALL PARTS                                                 $120.00
  • RUST BLUE O/U OR SXS BARRELS ONLY                        $245.00
  • PUMP OR SEMI AUTO RIFLE                                                 $240.00
  • RUGER NO.1 OR BROWNING 185 STYLE                         $280.00
  • OCTAGON BARRELS ADDITIONAL                                      $80.00

**FINISH TYPE MAY DEPEND ON SEVERITY OF RUST,PITTING, SCRATCHES OR DINGS.**

 

GENERAL REPAIRS OR INSTALLATIONS

  • SCOPE MOUNT AND BORE SIGHT                                           $30.00
  • SIGHT IN + AMMO                                                                          $35.00
  • BORE SIGHT ONLY                                                                        $5.00
  • INSTALL MID OR FRONT BEAD                                                 $20.00
  • INSTALL SLING SWIVELS                                                            $35.00
  • DRILL & TAP (INCLUDES MOUNT AND BORE SIGHT)        $80.00
  • INSTALL NEW SIGHTS ALREADY DRILLED AND TAPPED $15.00
  • CUT DOVETAIL                                                                                $45.00
  • DRILL AND TAP PER HOLE $20.00 / PLUS SET UP COST OF   $20.00
  • BLACK POWDER SIGHT IN + COMPONENTS                         $85.00

**ALL PRICES ARE FOR LABOR AND DO NOT INCLUDE THE COST OF PARTS OR AMMUNITION**

 

CLEAN & OIL

  • BOLT ACTION RIFLES                                            $65.00
  • SEMI-AUTO OR PUMP RIFLES                                 $85.00
  • LEVER ACTION RIFLES                                          $85.00
  • SINGLE SHOT RIFLE OR SHOTGUN                     $65.00
  • A-5 OR MODEL 12 STYLES                                    $85.00
  • SEMI-AUTO OR PUMP SHOTGUNS                       $85.00
  • O/U OR SXS SHOTGUN                                          $95.00
  • MUZZLELOADING RIFLES UNLOADED              $35.00-$65.00
  • HANDGUNS                                                           $35.00-$65.00

ALL OTHER GUNSMITHING SERVICES

  • HOURLY SHOP RATE IS $65.00
  • MINIMUM $35.00
  • FIREARM APPRAISAL FEE $35.00 EACH

**Clean and oil includes inspection of parts. If broken or worn parts are found. The customer will be notified. Replacement or repair of parts may require additional charges**.

STOCK WORK

  • SATIN OIL FINISH                                                                      $160.00
  • INSTALL RECOIL PAD + PAD COST                                         $45.00
  • CUT STOCK AND INSTALL PAD + PAD COST                          $65.00
  • STOCK FITTING AND INLETTING (WOOD OR SYNTHETIC)  P.OR.
  • CHECKERING $25.00 PER HOUR MIN $225.00

SHIPPING FOR REPAIR

**ALL FIREARMS MUST BE UNLOADED AND AMMO SHIPPED SEPERATE**

Simply box your firearm up with your current address and shipping info include your phone number and email address. If you can a photo copy of you drivers license in the box is all ways the best way to go. A brief discription of the work you need done. Once we receive your firearm one of our representatives will contact you that we have received it and go through a more detailed discription of the work you would like completed. If you need shipping materials and don't have any we can provide them for additional cost and a return shipping label just email Drew at redoak375@gmail.com for more info and payment options for shipping.

Return shipping cost will be added on to all repairs at the completion of the repair.

If you have any questions about how to ship or what type of boxes are appropriate let us know and we will help you with this process.

You may not ship loaded firearms to us or ammo in the same container as the firearm.

After completion of the repair we will contact you for payment and then ship the firearm back to you.

Ship to:

Red Oak Gunsmithing & Outfitters

20508 State St.

Onaway, MI 49765

REPAIR/SERVICE

FFL Transfer Fees $20.00 for up to three long guns. $20.00 each additional long gun. $30.00 for one handgun / $15.00 each for additional handguns up to four. More than four please contact Drew at redoak375@gmail.com

Return to Hughes Precision https://hughesprecision.com/

Subscribe to our mailing list

* indicates required
/ ( mm / dd )